Media Pro 4000 Brief Date: January 30th 2007 File: ICM-4030_MSC-4400_Cue_Control_Over_EtherNet-Telnet_BR013007 Module: ICM-4030 (11261-C) & MSC-4400 (11265-C) Title: ICM-4030, MSC-4400, Cue Control Over EtherNet / Telnet ********************************************************************* This brief is intended for Control Engineers and Technicians who are installing, programming or maintaining a MediaPro Control System. It is assumed that you have some understanding of Show Control, Windows PCs, and have some experience programming MediaPro 4000 Systems. Cue control via Telnet is functional in Firmware version ICM4030_v314.cod & MSC4400_v314.cod Example of use as follows: >telnet Welcome to Microsoft Telnet Client Escape Character is 'CTRL+]' Microsoft Telnet> open 192.168.0.100 Connecting To 192.168.0.100... **** Welcome to the Media Pro Telnet Server!**** Enter Password: MP4000 Entry Approved MP> ? PQXXXr = Play Que XXX SQXXXr = Stop Que XXX RQXXXr = Reset Que XXX Xr = Exit MP>PQ1 ACK MP>PQ2 NAK MP>pa1 ACK MP>pa2 NAK MP> {Note: Just a CR (0x13 [0D]) will get you a NAK.} NAK MP>x Goodbye! Connection to host lost. Press any key to continue... Microsoft Telnet> quit > ------------------------------------------------------------------------------- Specifications subject to change at any time. The data in this document incorporates proprietary rights of Anitech Systems Inc., 25021 Anza Drive, Valencia, CA 91355 USA Phone (661) 257-2184 Fax (661) 257-2025 E-Mail: Support@Anitech-Systems.com, Sales@Anitech-Systems.com Web http://www.Anitech-Systems.com, FTP ftp://ftp.Anitech-Systems.com Any party accepting this document does so in confidence and agrees that it shall not be duplicated in whole or in part, nor disclosed to others, without the consent of ANITECH SYSTEMS. If you are not the intended recipient, you are asked to please destroy/delete the document immediately. If you have received this document in error, please contact the sender. ----------------------------------------------------------------------